AEM Electronics Water/Methanol (V3) Injection Nozzle And Swirl Generator Kit
The AEM Electronics V3 Water/Methanol Injector (WMI) & Swirl Generator Kit joins the range of water/methanol accessories on offer and is a direct replacement/upgrade to the previous V2 injector design. Re-engineered to improve performance, that gives faster cooling and using less fluid to maintain inlet air cooling.Three interchangeable injector nozzles to cover a wide variety of HP levelsAdvanced injector designSingle point retaining clip for easier injector maintenanceAEM's Water/Methanol injection systems are developed for a range of applications in both petrol and diesel high-performance forced induction and naturally aspirated engines. They achieve measurable improvements in reducing air inlet charge temperatures, by as much as 100 degrees in some applications, increase your vehicle's anti-knock index, allowing reliable boost pressure increases and advanced ignition timing, without using high octane racing fuels, and due to the "steam-cleaning" effect of burning a water/methanol mix, reduce the carbon deposit build-up in your engine and potentially improve fuel economy.All of these performance improvements are dependent on the control and effectiveness of a highly atomised precision spray of Water/Methanol mix, injected into the vehicle's air intake system. AEM's innovative injector design uses a unique swirl generator technology, that improves atomisation to deliver faster inlet temperature cooling and uses less fluid to maintain inlet air cooling performance. This results in increased run times from a single water/methanol tank fill*, reducing fill time and overall running costs. In like for like testing (V3 250cc WMI nozzle and the V2 250cc WMI nozzle) the V3 achieved equivalent cooling temperatures but 6.5 seconds faster and in comparative tests (V3 250cc injector against a larger V2 500cc injector) the V3 achieved equivalent cooling temperatures and speed, but with significantly less fluid (almost 44% reduction). These improvements in real-time could present a significant driver advantage in track times or fast-road manoeuvring.The latest injector design features a simple, single retaining clip, that allows easy injector assembly/disassembly, for easier swirl generator change and injector cleaning/maintenance.Kit Includes: Machined Injector, Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of Flow, T Fitting and HosePlease note: Run-time between tank fills is dependent on the specific installation/application and will vary dependent on Water/Methanol supply tank size, engine HP and swirl-generator/flow requirements.
Price now:
From
£103.13
To
£106.87
Price History:
Details:AEM Electronics Water/Methanol (V3) Injection Nozzle And Swirl Generator Kit
The AEM Electronics V3 Water/Methanol Injector (WMI) & Swirl Generator Kit joins the range of water/methanol accessories on offer and is a direct replacement/upgrade to the previous V2 injector design. Re-engineered to improve performance, that gives faster cooling and using less fluid to maintain inlet air cooling.Three interchangeable injector nozzles to cover a wide variety of HP levelsAdvanced injector designSingle point retaining clip for easier injector maintenanceAEM's Water/Methanol injection systems are developed for a range of applications in both petrol and diesel high-performance forced induction and naturally aspirated engines. They achieve measurable improvements in reducing air inlet charge temperatures, by as much as 100 degrees in some applications, increase your vehicle's anti-knock index, allowing reliable boost pressure increases and advanced ignition timing, without using high octane racing fuels, and due to the "steam-cleaning" effect of burning a water/methanol mix, reduce the carbon deposit build-up in your engine and potentially improve fuel economy.All of these performance improvements are dependent on the control and effectiveness of a highly atomised precision spray of Water/Methanol mix, injected into the vehicle's air intake system. AEM's innovative injector design uses a unique swirl generator technology, that improves atomisation to deliver faster inlet temperature cooling and uses less fluid to maintain inlet air cooling performance. This results in increased run times from a single water/methanol tank fill*, reducing fill time and overall running costs. In like for like testing (V3 250cc WMI nozzle and the V2 250cc WMI nozzle) the V3 achieved equivalent cooling temperatures but 6.5 seconds faster and in comparative tests (V3 250cc injector against a larger V2 500cc injector) the V3 achieved equivalent cooling temperatures and speed, but with significantly less fluid (almost 44% reduction). These improvements in real-time could present a significant driver advantage in track times or fast-road manoeuvring.The latest injector design features a simple, single retaining clip, that allows easy injector assembly/disassembly, for easier swirl generator change and injector cleaning/maintenance.Kit Includes: Machined Injector, Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of Flow, T Fitting and HosePlease note: Run-time between tank fills is dependent on the specific installation/application and will vary dependent on Water/Methanol supply tank size, engine HP and swirl-generator/flow requirements.
Price now:
From
£103.13
To
£106.87
This site contains affiliate links for which we may be compensated.
eBay
New
£103.13
Demon Tweeks
6.67% (+ £6.68)
New
£106.87
Product Description
The AEM Electronics V3 Water/Methanol Injector (WMI) & Swirl Generator Kit joins the range of water/methanol accessories on offer and is a direct replacement/upgrade to the previous V2 injector design. Re-engineered to improve performance, that gives faster cooling and using less fluid to maintain inlet air cooling.Three interchangeable injector nozzles to cover a wide variety of HP levelsAdvanced injector designSingle point retaining clip for easier injector maintenanceAEM's Water/Methanol injection systems are developed for a range of applications in both petrol and diesel high-performance forced induction and naturally aspirated engines. They achieve measurable improvements in reducing air inlet charge temperatures, by as much as 100 degrees in some applications, increase your vehicle's anti-knock index, allowing reliable boost pressure increases and advanced ignition timing, without using high octane racing fuels, and due to the "steam-cleaning" effect of burning a water/methanol mix, reduce the carbon deposit build-up in your engine and potentially improve fuel economy.All of these performance improvements are dependent on the control and effectiveness of a highly atomised precision spray of Water/Methanol mix, injected into the vehicle's air intake system. AEM's innovative injector design uses a unique swirl generator technology, that improves atomisation to deliver faster inlet temperature cooling and uses less fluid to maintain inlet air cooling performance. This results in increased run times from a single water/methanol tank fill*, reducing fill time and overall running costs. In like for like testing (V3 250cc WMI nozzle and the V2 250cc WMI nozzle) the V3 achieved equivalent cooling temperatures but 6.5 seconds faster and in comparative tests (V3 250cc injector against a larger V2 500cc injector) the V3 achieved equivalent cooling temperatures and speed, but with significantly less fluid (almost 44% reduction). These improvements in real-time could present a significant driver advantage in track times or fast-road manoeuvring.The latest injector design features a simple, single retaining clip, that allows easy injector assembly/disassembly, for easier swirl generator change and injector cleaning/maintenance.Kit Includes: Machined Injector, Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of Flow, T Fitting and HosePlease note: Run-time between tank fills is dependent on the specific installation/application and will vary dependent on Water/Methanol supply tank size, engine HP and swirl-generator/flow requirements.
Product Specifications
General | |
|---|---|
type | water/methanol injection |
Brand | AEM Electronics |
Size | large |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.