AEM V3 Water / Methanol Injection Kits 1 Gallon Kit 30-3300
The AEM Water/Methanol Injection System is suitable for both forced induction and normally aspirated vehicles. The advantages of these kits are that they allow you to increase boost pressure and advance timing without having to run higher octane fuel, these kits are also effective for reducing engine inlet air temperatures and suppressing harmful detonation. Using this water/methanol kit can increase power by up to 20% on forced induction engines.Allows higher boost and increased ignition advance for better powerPrevents engine damaging pre-ignitionComprehensive kit with all wiring and plumbingFluid level sensor alerts when the tank is running low or if there is an errorThis kit includes a multiple input controller that allows users to install the kit on ultra high boost vehicles over 35PSI using a 0-5v voltage based external MAP sensor. The controller also works with input from injector duty cycle, frequency based MAF or 0.5v voltaged based MAF. This makes it suitable for use on high compression NA engines. The kit is also supplied with a fluid level sensor so it can detect if the fluid in the system is getting low or has an error. Once the system is installed adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservoir via the included injectors, this can result in significant horsepower gains.Kits are available in 2 different options:Option 1 - 1.15 gallon tank, with integral anti-starvation reservoir, and a single injector suitable for NA or forced induction petrol engines.Option 2 - Five gallon tank with 2 injectors suitable for high output diesel and petrol enginesThis kit includes:Multi-Input controller, Wiring harness, Boost Safe failsafe output,Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion.Precision-machined billet-aluminum injector with integral check valveInjector nozzles1.15 gallon tank with anti-starvation reservoir, 20 feet of injection tubing includedLED dash light for system status and low fluid warning
Price now:
From
£555.00
To
£607.28
Price History:
Details:AEM V3 Water / Methanol Injection Kits 1 Gallon Kit 30-3300
The AEM Water/Methanol Injection System is suitable for both forced induction and normally aspirated vehicles. The advantages of these kits are that they allow you to increase boost pressure and advance timing without having to run higher octane fuel, these kits are also effective for reducing engine inlet air temperatures and suppressing harmful detonation. Using this water/methanol kit can increase power by up to 20% on forced induction engines.Allows higher boost and increased ignition advance for better powerPrevents engine damaging pre-ignitionComprehensive kit with all wiring and plumbingFluid level sensor alerts when the tank is running low or if there is an errorThis kit includes a multiple input controller that allows users to install the kit on ultra high boost vehicles over 35PSI using a 0-5v voltage based external MAP sensor. The controller also works with input from injector duty cycle, frequency based MAF or 0.5v voltaged based MAF. This makes it suitable for use on high compression NA engines. The kit is also supplied with a fluid level sensor so it can detect if the fluid in the system is getting low or has an error. Once the system is installed adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservoir via the included injectors, this can result in significant horsepower gains.Kits are available in 2 different options:Option 1 - 1.15 gallon tank, with integral anti-starvation reservoir, and a single injector suitable for NA or forced induction petrol engines.Option 2 - Five gallon tank with 2 injectors suitable for high output diesel and petrol enginesThis kit includes:Multi-Input controller, Wiring harness, Boost Safe failsafe output,Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion.Precision-machined billet-aluminum injector with integral check valveInjector nozzles1.15 gallon tank with anti-starvation reservoir, 20 feet of injection tubing includedLED dash light for system status and low fluid warning
Price now:
From
£555.00
To
£607.28
This site contains affiliate links for which we may be compensated.
Demon Tweeks
6.36% (+ £36.32)
New
£607.28
Currently Unavailable
Product Description
The AEM Water/Methanol Injection System is suitable for both forced induction and normally aspirated vehicles. The advantages of these kits are that they allow you to increase boost pressure and advance timing without having to run higher octane fuel, these kits are also effective for reducing engine inlet air temperatures and suppressing harmful detonation. Using this water/methanol kit can increase power by up to 20% on forced induction engines.Allows higher boost and increased ignition advance for better powerPrevents engine damaging pre-ignitionComprehensive kit with all wiring and plumbingFluid level sensor alerts when the tank is running low or if there is an errorThis kit includes a multiple input controller that allows users to install the kit on ultra high boost vehicles over 35PSI using a 0-5v voltage based external MAP sensor. The controller also works with input from injector duty cycle, frequency based MAF or 0.5v voltaged based MAF. This makes it suitable for use on high compression NA engines. The kit is also supplied with a fluid level sensor so it can detect if the fluid in the system is getting low or has an error. Once the system is installed adjustments can be made to control the amount of water/methanol mixture that is fed into the inlet stream from the reservoir via the included injectors, this can result in significant horsepower gains.Kits are available in 2 different options:Option 1 - 1.15 gallon tank, with integral anti-starvation reservoir, and a single injector suitable for NA or forced induction petrol engines.Option 2 - Five gallon tank with 2 injectors suitable for high output diesel and petrol enginesThis kit includes:Multi-Input controller, Wiring harness, Boost Safe failsafe output,Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion.Precision-machined billet-aluminum injector with integral check valveInjector nozzles1.15 gallon tank with anti-starvation reservoir, 20 feet of injection tubing includedLED dash light for system status and low fluid warning
Product Specifications
General | |
|---|---|
Brand | AEM |
Color | light |
Size | 1 |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.